Every system we install starts from the same place: the slab. 95% of coating failures come from poor surface preparation, not from the product on the label — which is why we diamond grind, repair and profile every floor before anything goes down. From there, the right concrete flooring system in San Antonio depends on what the space has to survive and what it has to look like. Epoxy for stain resistance and color, metallic for a showpiece finish, quartz where the floor has to stay safe when wet, polished concrete for a sustainable modern look with no coating at all, and overlays when the slab itself needs rebuilding first. We’ll tell you honestly which one your space needs — including when the cheaper option is the right one.
Flooring Services
Coating Systems We Install
Six systems, one prep-first standard. Every one is matched to your traffic, exposure, and budget during the free consultation.
Our Standard
Built on Preparation. Backed by Performance.
01
Surface Preparation First
95% of coating failures trace back to prep. We diamond grind and repair every slab before a drop of product goes down.
02
Two-Component Materials
Industrial-grade two-component systems, not the cheaper single-component kits — the difference between a 5-year floor and a 15-year one.
03
Certified Installers
15+ years of experience and consistent application: even coverage, true color, no thin spots or roller lines.
04
Warranty-Backed Work
Every install is backed by a warranty covering adhesion, product failure, and craftsmanship — plus written care instructions.
Where We Work
The Same Systems, Commercial or Residential
We install the same industrial-grade materials in a two-car garage and a 50,000 sq ft warehouse — only the system spec changes.
Warehouse & Industrial
Retail & Showroom
Restaurant & Food Service
Automotive Shop
Office & Corporate
Medical & Healthcare
Manufacturing Plant
Sports & Recreation
Garage Floor Epoxy
Basement Flooring
Patio & Porch
Kitchen & Living Space
Request a Commercial Bid
Project Gallery
Recent Flooring System Installs Across San Antonio
A sample of epoxy, metallic, quartz, polished concrete and overlay projects completed by CB1 Specialty Concrete across San Antonio and nearby cities.
Our Process
From Bid Request to Final Walkthrough
1
Request a Bid
Submit your facility details and we’ll confirm scope and timing.
2
Site Visit & Measurement
We inspect the slab and give a clear, formal bid — no surprises.
3
Prep-First Installation
Diamond grind, repair as needed, then install on your schedule.
4
Final Walkthrough
We quality-check every detail before handing back your space.
FAQ
Common Flooring System Questions
Which flooring system is right for my space?
It depends on traffic, exposure and the look you want. Epoxy for stain resistance and color; metallic for a showpiece finish; quartz where the floor must stay safe when wet; polished concrete for a sustainable modern look with no coating; an overlay first if the slab itself is damaged. We assess your space during the free consultation and recommend honestly — including when the less expensive option is the right one.
What’s the difference between epoxy and polished concrete?
Epoxy is a coating applied on top of the concrete — high-gloss, customizable in color, and more stain-resistant. Polished concrete grinds and polishes the existing slab for a natural, industrial look with no coating and a lower cost. Want color, gloss or stain protection? Epoxy. Want a modern, eco-conscious, budget-friendly finish? Polished.
How much does concrete flooring cost in San Antonio?
Polished concrete typically runs $1,500–$5,000 residential; epoxy $2,500–$8,000; quartz $3,000–$7,000; metallic $4,000–$10,000+. Commercial warehouses run $6,000–$15,000+ depending on square footage and floor condition. The only accurate number comes from a free consultation on your actual space.
How long do your floors last?
Our systems are built for 10–15+ years, against an industry standard of 5–7. The difference is preparation and materials: we diamond grind and repair every slab first, and install industrial-grade two-component systems rather than cheaper single-component products.
What if my concrete is cracked or uneven?
Minor cracks under 1/4 inch are repaired and sealed before coating, included in most projects. For significant damage or uneven surfaces we recommend a concrete overlay — a thin new layer over the existing slab that creates a perfect foundation for any finish, at far less cost than full replacement.
Do you work with both homes and businesses?
Yes. We install the same industrial-grade systems in residential garages, basements and living spaces, and across 100+ completed commercial projects from 2,000 to 50,000+ sq ft — warehouses, retail, restaurants, offices, medical and manufacturing facilities.
Ready to Transform Your Concrete?
Prep it right. Install it once. Stand behind it for years. Free consultation, no pressure.